U.V. Cure Aquaseal Wader Patch

Fix your waders without losing fishing time with this UV wader repair glue. Made in USA.

Details

Ultra fast curing U.V. wader repair product activated by sunlight. Flexible, solvent free formula. Ideal for repairing Gore-Tex fabric waders, microfiber waders, and neopreen waders. Also can be used to coat fly line knots, cements fly heads, seals leaks in tents and inflatable sleeping pads etc. Net wt. ¼ oz. This is the fastest “in the field” UV wader repair adhesive for a quick fix. Standard Aquaseal is still needed for a permanent repair. Made in USA.

Reviews

Overall: Show Rating Distribution 3.7 / 5 based on 3 reviews

5-star:
1
4-star:
1
3-star:
0
2-star:
1
1-star:
0

2 of 3 reviewers would recommend this product to a friend.

  • 4/5

    uv sealant--not adhesive - 6/26/2014
    By: from coastal alaska

    I feel for Mr Seattle in some ways. It is goopy stuff but the nozzle should do all the application for you. The fingers shouldn't touch it at all. Directions are a bit spare but may be better now than when you reviewed three and a half years ago. I do think the company should more clearly state that it is a temporary solution and that you will have to repair again later with aquaseal. The reality is that unless you need to patch immediately, it is probably better to leave alone and use the real stuff when you get back for the night. I have used it to field repair several different waders( both neoprene and membrane types) and found that it is only a short time before the adhesion is lost. (I did get them good and dry first) Then there was that much more hassle picking them clean to do a permanent job. Another consideration is that it does not air dry at all. What that means to you in real world is this: if you try to glue a tear together, the only part of the patch that sets up is the part that gets exposed to uv light. so any goo hidden behind fibers or between layers remains goo. The solution is to use super glue to achieve the bond and then seal over it with the uv sealant. This and other similar uv-set products are a great addition to but not a replacement for the old standby field repair kits of super glue and repair tape. That said, it is awesome stuff for fairing out knots and splices as well as making instant fly heads. If you've drag burned a hole in your finger or some other abrasion, this stuff makes a fast patch second to none! Having a uv lamp (flashlight) is a great idea if you carry this stuff since it only works well in fairly bright sun. Overcast is a dicey outcome

  • 2/5

    Disappointment - 1/10/2011
    By:

    [resubmitting this review because it does not show on the web site] No Review Title: Yuck! Now will it work? This product comes with unreliable directions, no applicator and is extremely tricky to apply and work with. The directions say use rubbing alcohol to find leaks in seams but that did not work. None of the known leaks revealed by this tactic. The packaging does not come with an applicator so you have to use your own brush or fingers but the stuff is so sticky, it's like trying to push around chewing gum. As a result the sealer goes on lumpy and unevenly. I will have to see if the seems are not sealed. I made one application but for the second application, I found the tube cap would not unscrew, so I had to slice open the tube. Very messy. Finally, you have the difficult choice of using gloves which will themselves stick to one another or your fingers. I tried both approaches. My hands now are covered with dirty-looking film that does not come off with alcohol, nail polish remover or soap and water. The product should come with a thinner and applicator brush or device so you can apply the goop evenly and cover a broader area.

  • 5/5

    Put this in your pack! - 10/27/2010
    By: from Grosse Pointe Farms, Michigan
    Top 10 Contributor

    This is an excellent product. However, I would recommend one additional item that when combined, make it one of the best products in my pack. I also purchased a minil U.V. lamp (about the size and shape of half of a cigarette) from my local Orvis Company store. When you dab a little of the aquaseal on a hole or tear, and then shine the U.V. flashlight on it for about 5 seconds, it cures into a hard yet flexible patch. The light is esspecially helpful if you happen to get a hole in your waders on a cloudy day or at night when there is no sun. This stuff requires U.V. rays to cure. Another product in my local Orvis Company store that I don't see on the website but would highly recommend is a similar liquid to put on knots called Loon UV Knot Sense. If you dab a little liquid on a knot, and then hit it with the U.V. light, you have a virtually indistructible knot. It is also great to use when tying a leader to running line, because you can sort of mold it so that it creates a smooth, elongated buble that lets the knot slide through the guides much easier.

Wader Care & Repair

Wader Care & Repair

Care & Cleaning of Waterproof, Breathable Garments

The outer surface of most laminated waterproof-breathable fabrics is treated with a durable water-repellent coating (DWR). This chemical treatment forces water to bead up and roll off the surface of the fabric improving the overall performance and comfort of the garment.

Example of a DWR-coated garment.

DWR coatings will begin to degrade after extended use and as the garment becomes soiled. The degradation will inhibit the DWR coating’s ability to bead water and cause the garment to “wet out” as the face fabric material absorbs water.

Example of a garment where the DWR coating is beginning to degrade.

Although the garment is still waterproof, the water saturated face fabric will hinder the garments ability to breathe, increase interior condensation and produce a cold, clammy feeling for the wearer. It is important to clean your garments regularly to help avoid this situation.

How to Clean DWR-Coated Garments

Most garments can be machined washed; consult the care instruction label on the garment. Make sure to use an additive-free powdered laundry detergent or a liquid detergent designed specifically for synthetic, breathable fabrics. Do not use any detergents that contain fabric softeners or color-safe bleach.

For machine-washable items, such as stockingfoot waders and jackets, use the following cleaning agents:

For non-washable items, such as bootfoot waders, use Granger's G-Wash Spray Cleaner.

Please read and follow the instructions included with these products and the garment manufacturer’s care and cleaning directions.

How to Restore the DWR Coating

Cleaning alone may not restore the DWR coating’s effectiveness.

For a clean garment, use a cool iron or tumble dry on low to medium heat to reactivate the coating. Please follow the garment manufacturer’s recommended instructions for drying.

To reapply a DWR coating, we recommend the following products. Please be sure to read and follow the instructions for application carefully.

With basic care and maintenance, your waterproof, breathable garment(s) should provide you years of use and enjoyment.

Fly Fishing Wader Repair

Although many steps are taken to insure that Orvis waders are built to be durable, there is a possibility that over the course of a wader’s lifetime it will develop a leak or get damaged. Waders are often damaged when walking to and from you favorite fishing hot spot and are often caused by blackberry bushes, brambles, barbed-wire fences, wild roses and other assorted thorny plants. Also, as much as we don’t like to admit, we all do occasionally take a fall, which can often puncture or tear your waders.

Orvis will gladly repair your damaged waders for you. To submit a repair request, complete the Wader Repair Request Form. You will be charged $30 for all non-warranty repairs.

If you would like to repair your waders on your own, it is very simple. The procedure for repairing punctures and tears is outlined below.

Punctures

The first step is to locate the puncture. Sometimes this is very apparent and can be visually determined quickly and accurately. However, in most cases you will have a general idea where the puncture is but aren’t 100% sure of its exact location. The quickest way to locate the source of the puncture is to turn your waders inside out and spray the general area of the leak with rubbing alcohol. Take your hand and spread the rubbing alcohol onto the inside fabric. Turn your waders right side out and look for a dark spot to appear on the face fabric.

Example of how to spot a puncture in a wader.

Once located, mark the spot on both the outside and inside of the wader. At this point you will need to have either the Orvis Wader Repair Kit, Aquaseal Wader Repair Kit or a tube of Aquaseal to complete the repair. Make sure the area is clean using either plain rubbing alcohol or an alcohol prep pad included in the kit.

Apply a dab of Aquaseal to completely cover the spot and extend it for about 1/8” of an inch to the outside of the wader.

How to fix a puncture in a wader.

Let it dry for about 12 hours (to speed drying time use Cotol) and repeat the process on the inside.

For larger punctures or punctures in high wear areas, apply a second coating of Aquaseal over the initial application. Be sure to extend the second coat 1/8” beyond the edge of the first application so that it can adequately bond to the wader.

Temporary repairs of puncture leaks can be made utilizing UV Cure Aquaseal Wader Patch 1L9L which cures in a few minutes with exposure to UV light (sunlight). However, this product is not durable enough to serve as a permanent fix. If you are out fishing and can locate a puncture leak, then this product can have you fishing again in 15 minutes and will hold up until you are able to affect a more permanent repair with regular Aquaseal.

Tears

If you tear your breathable waders, the repair process is slightly different. Locating the tear isn’t an issue, but you will need to stabilize the area by applying some tape to the inside of the wader. The Orvis Wader Repair Kit and the Aquaseal Wader Repair Kit include tape, but common duct tape will work in a pinch.

Tears in a Wader Using tape to match the two sides of the tear together

Apply the tape to the inside of the wader being sure to match the two sides of the tear together neatly.

Preparing a tear for seal.

Clean the area with alcohol and then apply enough Aquaseal to completely cover the tear and overlap by 1/8 of an inch.

Using Aquaseal to seal a tear.

Allow to dry for about 12 hours (to speed drying time use Cotol). Remove the tape from the inside of the wader and clean the area with alcohol to remove any residue left by the tape. Repeat the Aquaseal application on the inside of the wader.

Using Aquaseal to seal a tear.

For larger tears or tears in high stress areas, apply a second coating of Aquaseal over the initial application. Be sure to extend the second coat 1/8” beyond the edge of the first application so that it can adequately bond to the wader.

The waterproof tape included in the Orvis Wader Repair Kit or the Aquaseal Wader Repair Kit will facilitate a temporary repair in the field, but is not durable enough for a permanent repair.

While every effort should be made to avoid damaging your wader, punctures and tears will occur especially if you are using your waders on a regular basis. These simple repair procedures will allow you to continue to enjoy your favorite pair of waders for years.

Buy it now

Select an item: SI1L9L
  • U.V. Cure Aquaseal Wader Patch
    $6.95
Quantity   Add To Basket